Most motorcycle problems are caused by the nut that connects the handlebars to the saddle.

Help with wiring question

Share
avatar
71cb500racer
Newbie
Newbie

Posts : 2

Help with wiring question

Post by 71cb500racer on Mon 07 Aug 2017, 3:47 am

Hey guys.. need a quick tip on trying to wire some cognito moto indicator lights.. these are led replacements for the oil/high beam/turnsignal/neutral lights in the triple clamps. I have found the wires on the diagram but the cognito unit has red/black for oil light,yellow/black for turn..blue/black for high beam.. etc..

I am not sure what to wire them to on the bike... any ideas on which to connect to colored to and the black to?

Sorry I am new here and can't post pics yet



avatar
71cb500racer
Newbie
Newbie

Posts : 2

Re: Help with wiring question

Post by 71cb500racer on Mon 07 Aug 2017, 3:51 am

To be more clear, I mean the colored and black combo. Should go to which color in the current indicator lights. Meaning orange and sky blue connect to yellow and black? What does the black connect to? sorry if his is confusing, it would be much easier if I could reference a picture.. your help is appreciated!
avatar
Jameshambleton
Moderator
Moderator

Posts : 1912
Location : Bedale, North Yorkshire

Re: Help with wiring question

Post by Jameshambleton on Mon 07 Aug 2017, 7:55 am

I doubt anyone here will be able to help as this forum is for the 94-02 CB500's. 
You should trace the wires or maybe look at the existing connections and see what colours go into that section of the clock wiring loom.

Sponsored content

Re: Help with wiring question

Post by Sponsored content


    Current date/time is Tue 21 Nov 2017, 9:07 pm