You don’t stop riding because you’re getting old, but you get old when you stop riding.

Stainless engine mounting bolts and alloy spacers

Share
avatar
ANDYC
the 900
the 900

Mechanic
Posts : 959
Location : Windsor

Re: Stainless engine mounting bolts and alloy spacers

Post by ANDYC on Mon 11 Jul 2016, 10:12 pm

I believe the hardest part will be getting the old ones out Very Happy
avatar
Llewelyn1965
the 900
the 900

Posts : 364
Location : Swansea

Re: Stainless engine mounting bolts and alloy spacers

Post by Llewelyn1965 on Tue 12 Jul 2016, 8:33 am

Hi Andy, Mine arrived today. Thank you. :-)
avatar
Jameshambleton
Moderator
Moderator

Posts : 2788
Location : Bedale, North Yorkshire

Re: Stainless engine mounting bolts and alloy spacers

Post by Jameshambleton on Thu 21 Jul 2016, 11:56 am

I can confirm that the rear engine mounting bolt is also the correct length for the oe Honda crash bars on the naked version of our bike.
avatar
Mad_Taffy_500
Scratcher!
Scratcher!

Posts : 29
Location : Newport

Re: Stainless engine mounting bolts and alloy spacers

Post by Mad_Taffy_500 on Thu 28 Jul 2016, 12:14 am

Hi Andy could I order a set of theses please
avatar
ANDYC
the 900
the 900

Mechanic
Posts : 959
Location : Windsor

Re: Stainless engine mounting bolts and alloy spacers

Post by ANDYC on Thu 28 Jul 2016, 8:39 am

@Mad_Taffy_500 wrote:Hi Andy could I order a set of theses please



Sure,  which model is it for? Naked or faired model?
avatar
Mad_Taffy_500
Scratcher!
Scratcher!

Posts : 29
Location : Newport

Re: Stainless engine mounting bolts and alloy spacers

Post by Mad_Taffy_500 on Thu 28 Jul 2016, 9:22 am

Naked
avatar
gillers50
Squiddy
Squiddy

Posts : 15
Location : Ripon, North Yorks.

Re: Stainless engine mounting bolts and alloy spacers

Post by gillers50 on Mon 27 Nov 2017, 8:14 pm

Hi Andy,
Are you still making these sets??  I am still trying to remove my front bolt but I am sure it will be scrap when finished. Might as well do the whole set in one go.

I have a faired 2003 bike with crash bars - is this a problem.

Please PM me with details of cost and payment methods and I will sort.

Many thanks
Peter
avatar
ANDYC
the 900
the 900

Mechanic
Posts : 959
Location : Windsor

Re: Stainless engine mounting bolts and alloy spacers

Post by ANDYC on Mon 27 Nov 2017, 8:29 pm

Hi Peter,
Yes I still do them. I'll work out the cost and let you know tomorrow. I'll have to check what stock I have.
avatar
geewhizz
the 900
the 900

Posts : 623

Re: Stainless engine mounting bolts and alloy spacers

Post by geewhizz on Mon 27 Nov 2017, 10:30 pm

Hi Andy I'm interested to know the price too. 

Thanks,

G
avatar
ANDYC
the 900
the 900

Mechanic
Posts : 959
Location : Windsor

Re: Stainless engine mounting bolts and alloy spacers

Post by ANDYC on Tue 28 Nov 2017, 11:57 am

Due to the unfortunate reality that everything is getting more and more expensive these days the prices for me to make these has had to rise accordingly I'm afraid guys.
A set for the 's' model is now £35 and the naked models are now £40.
That is posted to UK mainland.
avatar
gillers50
Squiddy
Squiddy

Posts : 15
Location : Ripon, North Yorks.

Re: Stainless engine mounting bolts and alloy spacers

Post by gillers50 on Tue 28 Nov 2017, 1:01 pm

Hi Andy

Thanks for the prompt reply. Can I order a set for my 2003 faired model (the s model I believe - haven't had it long)  It also has some crash bars fitted but don't know if that makes a difference to the length of the front bolt!

Let me know how I can pay you please i.e. paypal, check or whatever,

Cheers

Peter
avatar
ANDYC
the 900
the 900

Mechanic
Posts : 959
Location : Windsor

Re: Stainless engine mounting bolts and alloy spacers

Post by ANDYC on Tue 28 Nov 2017, 3:03 pm

@gillers50 wrote:Hi Andy

Thanks for the prompt reply. Can I order a set for my 2003 faired model (the s model I believe - haven't had it long)  It also has some crash bars fitted but don't know if that makes a difference to the length of the front bolt!

Let me know how I can pay you please i.e. paypal, check or whatever,

Cheers

Peter


No problem Peter,
I'll do the front bolt 10mm longer than usual then to allow for the crash bars.
Paypal is the easiest way,

a.carwardine@gmail.com  is the place to send it.

For some reason I couldn't PM you.
avatar
gillers50
Squiddy
Squiddy

Posts : 15
Location : Ripon, North Yorks.

Re: Stainless engine mounting bolts and alloy spacers

Post by gillers50 on Tue 28 Nov 2017, 7:36 pm

Thanks Andy.

Haven't been on the forum long so my PM bit is probably not set up - my fault.

However, I have sent you £35 via paypal and confirmed sent.

Address is: 

Many thanks

Peter


Last edited by Jameshambleton on Wed 29 Nov 2017, 8:18 pm; edited 1 time in total (Reason for editing : Address removed for obvious reasons.)
avatar
ANDYC
the 900
the 900

Mechanic
Posts : 959
Location : Windsor

Re: Stainless engine mounting bolts and alloy spacers

Post by ANDYC on Tue 28 Nov 2017, 8:06 pm

No problem Peter,
I'll get onto it as soon as I can. 
Thanks.
avatar
eternally_troubled
Admin
Admin

Awesome!
Posts : 3910
Location : 'ere be fens. (near Cambridge)

Re: Stainless engine mounting bolts and alloy spacers

Post by eternally_troubled on Wed 29 Nov 2017, 7:25 pm

@ANDYC wrote:Due to the unfortunate reality that everything is getting more and more expensive these days the prices for me to make these has had to rise accordingly I'm afraid guys.
A set for the 's' model is now £35 and the naked models are now £40.
That is posted to UK mainland.

I wouldn't worry, your prices are quite fair - the original parts (i.e. not stainless!) for a naked are £30 from Lings *without* the postage....
avatar
ANDYC
the 900
the 900

Mechanic
Posts : 959
Location : Windsor

Re: Stainless engine mounting bolts and alloy spacers

Post by ANDYC on Sun 03 Dec 2017, 11:28 am

@gillers50 wrote:Thanks Andy.

Haven't been on the forum long so my PM bit is probably not set up - my fault.

However, I have sent you £35 via paypal and confirmed sent.

Address is: 

Many thanks

Peter



Hi Peter,
Could you PM me your address please, so I can get them off to you tomorrow morning.
I know you did supply it but James deleted it for security reasons.
avatar
tt fan
Godly
Godly

Posts : 67
Location : Cambridge

Re: Stainless engine mounting bolts and alloy spacers

Post by tt fan on Tue 06 Feb 2018, 8:39 pm

Hi Andy,
Could you do me an engine bolt and spacers for a 'naked' model please? If it's ok, i'll pm you my details.
Thanks in advance.
avatar
ANDYC
the 900
the 900

Mechanic
Posts : 959
Location : Windsor

Re: Stainless engine mounting bolts and alloy spacers

Post by ANDYC on Tue 06 Feb 2018, 8:59 pm

No problem, I'll get onto it as soon as I can.
avatar
stormbringer
Moderator
Moderator

Posts : 1308
Location : Aarhus, Denmark

Re: Stainless engine mounting bolts and alloy spacers

Post by stormbringer on Sun 16 Sep 2018, 8:04 pm

This thread still active?

I'll be looking for a set of bolts&spacers in the near future, and why not do it right the first time?
avatar
ANDYC
the 900
the 900

Mechanic
Posts : 959
Location : Windsor

Re: Stainless engine mounting bolts and alloy spacers

Post by ANDYC on Sun 16 Sep 2018, 8:36 pm

It is still active and available.

Sponsored content

Re: Stainless engine mounting bolts and alloy spacers

Post by Sponsored content


    Current date/time is Tue 16 Oct 2018, 11:42 am