Most motorcycle problems are caused by the nut that connects the handlebars to the saddle.

Breaking 500s (disc model)

Share
avatar
ANDYC
the 900
the 900

Mechanic
Posts : 772
Location : Windsor

Re: Breaking 500s (disc model)

Post by ANDYC on Sun 28 Jul 2013, 9:55 am

Tzache wrote:http://www.bike-parts-honda.com/pieces-honda-detail-1122-13MY5WEA-CB500SX-1999-F__1000-CB+500.html
Part no 9 - this is the most important because i cand know my speed  

http://www.bike-parts-honda.com/pieces-honda-detail-1122-13MY5WEA-CB500SX-1999-F__2800-CB+500.html
Part 16 the crom cap that fits in the back swing arm bolt hole 


These ones ? 
Apologies for my slow reply, been working too late to think about much else.
I do know that my spare spindle caps went a few months ago.
I'll take a look in my spares boxes today for the speedo drive, I think you may be in luck.
Andy
avatar
jamiecee
Newbie
Newbie

Posts : 5

Re: Breaking 500s (disc model)

Post by jamiecee on Sun 28 Jul 2013, 10:17 am

Hi mate just wondering if you have a pad spring clip number 5 on the diagram


http://www.bike-parts-honda.com/pieces-honda-detail-1161-13MY5WEA-CB500V-1997-F__1102-CB+500.html
avatar
Jakliddle
Crotch Rocketuer
Crotch Rocketuer

Posts : 34

Re: Breaking 500s (disc model)

Post by Jakliddle on Mon 29 Jul 2013, 8:31 pm

Swinging arm?
avatar
Beresford
the 900
the 900

Posts : 1446
Location : not that far from Kirkistown

Re: Breaking 500s (disc model)

Post by Beresford on Sat 10 Aug 2013, 5:31 pm

 I know that this is a bit late, however I need an 'S' headlight unit urgently. Is yours still available?
avatar
ANDYC
the 900
the 900

Mechanic
Posts : 772
Location : Windsor

Re: Breaking 500s (disc model)

Post by ANDYC on Sun 11 Aug 2013, 12:17 pm

Beresford wrote: I know that this is a bit late, however I need an 'S' headlight unit urgently. Is yours still available?
Unfortunately not.
avatar
greenstiles
Squiddy
Squiddy

Posts : 17

Re: Breaking 500s (disc model)

Post by greenstiles on Thu 29 Aug 2013, 1:05 pm

where are you pls, silencer ?
avatar
Adam Thistlethwaite
Newbie
Newbie

Posts : 4
Location : Norfolk

Parts

Post by Adam Thistlethwaite on Sat 19 Oct 2013, 9:49 am

Hi Andy
i was wondering if you still had some bits i needed
what i need is the front brake assembly, the bit that mounts to the bars with the reservoir, and also the rear fairing, if it was in blue?
thanks
Adam Very Happy
avatar
cheyenne1000
Newbie
Newbie

Posts : 9

Re: Breaking 500s (disc model)

Post by cheyenne1000 on Thu 24 Oct 2013, 9:34 am

Complete plate for seat lock?
CB500s 1999

Thanks
avatar
ANDYC
the 900
the 900

Mechanic
Posts : 772
Location : Windsor

Re: Breaking 500s (disc model)

Post by ANDYC on Thu 24 Oct 2013, 8:40 pm

cheyenne1000 wrote:Complete plate for seat lock?
CB500s 1999

Thanks
Yes I'm sure I have one of those, will check tomorrow.
avatar
ANDYC
the 900
the 900

Mechanic
Posts : 772
Location : Windsor

Re: Breaking 500s (disc model)

Post by ANDYC on Sun 27 Oct 2013, 5:39 pm

cheyenne1000 wrote:Complete plate for seat lock?
CB500s 1999

Thanks
Sorry it took so long to confirm, but yes i have one with the cable and latching mechanism. £10 + postage.
avatar
cheyenne1000
Newbie
Newbie

Posts : 9

Re: Breaking 500s (disc model)

Post by cheyenne1000 on Sun 27 Oct 2013, 6:03 pm

Hi,
    just to confirm, this is the plate held by 2 bolts onto the bike frame. (not describing this very well sorry)

If this is correct can you give me details of how you would like paid.

Thanks
avatar
red series 3
Crotch Rocketuer
Crotch Rocketuer

Posts : 36

Re: Breaking 500s (disc model)

Post by red series 3 on Sun 27 Oct 2013, 8:46 pm

Any chance for the lock and keys. Tank filler, ignition barrel seat lock. I've lost my key and nobody thinks they can make one.
avatar
glen.wilson1@gmx.com
the 900
the 900

Awesome!
Posts : 546
Location : manchester

Re: Breaking 500s (disc model)

Post by glen.wilson1@gmx.com on Mon 28 Oct 2013, 11:46 am

any bolts for the grab rail???
avatar
KarDvy1405
Newbie
Newbie

Posts : 5

Lock Set

Post by KarDvy1405 on Tue 29 Oct 2013, 10:12 am

Do you still have all the locks? (ignition, petrol cap & seat lock) Are they all working off 1 keys. If they are how much would you want for them?

Karl
avatar
ANDYC
the 900
the 900

Mechanic
Posts : 772
Location : Windsor

Re: Breaking 500s (disc model)

Post by ANDYC on Wed 30 Oct 2013, 8:02 pm

KarDvy1405 wrote:Do you still have all the locks? (ignition, petrol cap & seat lock) Are they all working off 1 keys. If they are how much would you want for them?

Karl
I'll have to check, but there is a good chance.
avatar
ANDYC
the 900
the 900

Mechanic
Posts : 772
Location : Windsor

Re: Breaking 500s (disc model)

Post by ANDYC on Wed 30 Oct 2013, 8:04 pm

glen.wilson1@gmx.com wrote:any bolts for the grab rail???
I'm afraid not.
avatar
palli
Newbie
Newbie

Posts : 4
Location : NORWAY

Re: Breaking 500s (disc model)

Post by palli on Fri 20 Dec 2013, 1:03 pm

Do you have the footrest bracket on the right side ?
avatar
The_Wasp
Four's a...something...
Four's a...something...

Posts : 150
Location : Crewe, Cheshire

Re: Breaking 500s (disc model)

Post by The_Wasp on Tue 31 Dec 2013, 11:10 pm

I know the wheels are long gone but did you keep the brake disks by any chance?
avatar
glen.wilson1@gmx.com
the 900
the 900

Awesome!
Posts : 546
Location : manchester

Re: Breaking 500s (disc model)

Post by glen.wilson1@gmx.com on Wed 01 Jan 2014, 1:32 pm

hi dont suppose you have the coolent thermostat sensor? the smaller one that goes on   the end of the thermostat housing (not the one on the radiator) it looks like this ive just lost mine taking it off for a service!!
http://www.ebay.co.uk/itm/360693075600?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649
avatar
timhttr600
Newbie
Newbie

Posts : 8

Re: Breaking 500s (disc model)

Post by timhttr600 on Sun 12 Jan 2014, 5:46 pm

Hi Doyou have the right hand front indicator with the little right angle bracket that mounts it to the fairing frame
cheers
 tim
avatar
ANDYC
the 900
the 900

Mechanic
Posts : 772
Location : Windsor

Re: Breaking 500s (disc model)

Post by ANDYC on Sun 12 Jan 2014, 6:28 pm

timhttr600 wrote:Hi Doyou have the right hand front indicator with the little right angle bracket that mounts it to the fairing frame
cheers
 tim
Long gone, sorry Tim.
avatar
hullpaul
Newbie
Newbie

Posts : 3

CB500 BITS

Post by hullpaul on Tue 21 Jan 2014, 7:35 pm

FOOTREST PLATES AND FOOTRESTS?

PAUL
07847 454234 [HULL]
avatar
hullpaul
Newbie
Newbie

Posts : 3

cb500 bits

Post by hullpaul on Thu 23 Jan 2014, 11:40 pm

Hi Andy,
have you got the footrest hangers [both[- with or without footrests?
Paul

Sponsored content

Re: Breaking 500s (disc model)

Post by Sponsored content


    Current date/time is Tue 24 Oct 2017, 3:17 am